Asterix category 016 - Independent Non-Cooperative Surveillance System Configuration Reports
category: 016
edition: 1.0
date: 2019-07-15
Preamble
Surveillance data exchange.
Description of standard data items
I016/000 - Message Type
Definition: This data item conveys the message type.
Structure:
8 bits [
........
]values:
1: System Configuration
2: Transmitter / Receiver Configuration
I016/010 - Data Source Identifier
Definition: Identification of the Ground System from which the data is received.
Structure:
I016/010/SAC - System Area Code
- 8 bits [
........
]- raw value
I016/010/SIC - System Identification Code
- 8 bits [
........
]- raw value
NOTE - The up-to-date list of SACs is published on the EUROCONTROL Web Site (http://www.eurocontrol.int/asterix).
NOTE - The SICs are allocated by the national authority responsible for the surveillance infrastructure.
I016/015 - Service Identification
Definition: Identifies the service being reported.
Structure:
- 8 bits [
........
] - raw value
NOTE - The service identification is allocated by the system.
I016/140 - Time of Day
Definition: Absolute time stamping expressed as UTC time.
Structure:
- 24 bits [
........................
] - unsigned quantity
- unit: “s”
- LSB = 1/27 s ≈ 7.81e − 3 s
NOTE - The time of day value is reset to zero each day at midnight.
I016/200 - System Configuration Reporting Period
Definition: Data item to indicate the reporting period of the system configuration messages.
Structure:
- 8 bits [
........
] - unsigned quantity
- unit: “s”
- LSB = 1 s
- value > 1 s
NOTE - The item will be sent periodically (every SCRP) and each time a value change occurs.
I016/300 - Pair Identification
Definition: The use of a pair identifier in this data item, that is common with its counterpart in ASTERIX Category I015/400, enables direct mapping from the INCS Target Report to the Transmitter/Receiver Pair that contributed to the target report. This is an identifier pointing to a measurement that was created from a specific contributing pair where the Pair Identifier refers to the index that details both the transmitter characteristics (DVB-T, DAB, FM, dedicated etc) and the receiver characteristics.
Structure:
Repetitive item, repetition factor 8 bits.
I016/300/PID - Pair Identification
- 16 bits [
................
]- raw value
I016/300/TID - Transmitter Identification
- 16 bits [
................
]- raw value
I016/300/RID - Receiver Identification
- 16 bits [
................
]- raw value
I016/400 - Position of the System Reference Point
Definition: Position of the system reference point in WGS-84 coordinates.
Structure:
I016/400/LAT - Latitude
- 32 bits [
................................
]- signed quantity
- unit: “°”
- LSB = 180/231 ° ≈ 8.38e − 8 °
- value > = − 90 °
- value < = 90 °
I016/400/LON - Longitude
- 32 bits [
................................
]- signed quantity
- unit: “°”
- LSB = 180/231 ° ≈ 8.38e − 8 °
- value > = − 180 °
- value < 180 °
NOTE - Positive longitude indicates East. Positive latitude indicates North.
NOTE - I016/400 shall only be sent together with item I016/405 “Height of the System Reference Point”.
I016/405 - Height of System Reference Point
Definition: Height of the system reference point in Two’s Complement form. The height shall use mean sea level as the zero reference level.
Structure:
- 16 bits [
................
] - signed quantity
- unit: “m”
- LSB = 1/22 m ≈ 0.25 m
- value > − 8192 m
- value < 8192 m
NOTE - I016/405 shall only be sent together with item I016/400 “Position of the System Reference Point”.
I016/410 - Transmitter Properties
Definition: This item provides properties of a transmitter component.
Structure:
Repetitive item, repetition factor 8 bits.
I016/410/TID - Transmitter ID
- 16 bits [
................
]- raw value
I016/410/LAT - Latitude
- 32 bits [
................................
]- signed quantity
- unit: “°”
- LSB = 180/231 ° ≈ 8.38e − 8 °
- value > = − 90 °
- value < = 90 °
I016/410/LON - Longitude
- 32 bits [
................................
]- signed quantity
- unit: “°”
- LSB = 180/231 ° ≈ 8.38e − 8 °
- value > = − 180 °
- value < 180 °
I016/410/ALT - Altitude
- 16 bits [
................
]- signed quantity
- unit: “m”
- LSB = 1/22 m ≈ 0.25 m
- value > − 8192 m
- value < 8192 m
I016/410/TTO - Transmission Time Offset
- 32 bits [
................................
]- signed quantity
- unit: “ns”
- LSB = 2 ns
I016/410/(spare)
- 4 bits [
....
]I016/410/ATO - Accuracy of Transmission Time Offset
- 20 bits [
....................
]- unsigned quantity
- unit: “ns”
- LSB = 1 ns
I016/410/PCI - Parallel Transmitter Index
- 16 bits [
................
]- unsigned integer
- NOTE - Regarding Transmitter Identification:
-
a. Individual channels of a transmitter are considered as separate collocated transmitters.
b. A Transmitter ID may be assigned to individual channels of a compound transmitter. i.e. a single multi-channel transmitter may be assigned several Tx ID.
c. The Tx ID shall be used in a unique way for a specific SAC/SIC.
- NOTE - Regarding Transmitter Latitude and Longitude and Altitude:
-
a. The Tx Location and Altitude is the position of the component in WGS-84 coordinates. The vertical distance between the component and the projection of its position on the earth’s ellipsoid, as defined by WGS-84, in two’s complement form.
- NOTE - Regarding Transmission Time Offset
-
a. Time offset of transmitter compared to the reference transmitter within the single frequency network (SFN).
- NOTE - Regarding Accuracy of Transmission Time Offset
-
a. The Accuracy of the Transmission Time Offset is the Standard Deviation of the measurement of the transmission time offset between the transmitter channel compared to the reference transmitter within the single frequency network (SFN).
- NOTE - Regarding Parallel Transmitter Index
-
a. The Parallel Transmitter Index is the identification of the transmitter via index, which is sent in parallel.
b. For referring to a one-octet index bits-16/9 shall be set to zero.
c. This index shall be used in a unique way for a specific SAC/SIC.
d. In a Single Frequency Network the parallel transmitter index is the index of the reference transmitter.
I016/420 - Receiver Properties
Definition: This item provides properties of the receiver component.
Structure:
Repetitive item, repetition factor 8 bits.
I016/420/RID - Receiver Component ID
- 16 bits [
................
]- raw value
I016/420/LAT - Latitude
- 32 bits [
................................
]- signed quantity
- unit: “°”
- LSB = 180/231 ° ≈ 8.38e − 8 °
- value > = − 90 °
- value < = 90 °
I016/420/LON - Longitude
- 32 bits [
................................
]- signed quantity
- unit: “°”
- LSB = 180/231 ° ≈ 8.38e − 8 °
- value > = − 180 °
- value < 180 °
I016/420/ALT - Altitude
- 16 bits [
................
]- signed quantity
- unit: “m”
- LSB = 1/22 m ≈ 0.25 m
- value > − 8192 m
- value < 8192 m
- NOTE - Regarding the Receiver Identification
-
a. The Rx ID shall be used in a unique way for a specific SAC/SIC.
- NOTE - Regarding the Receiver Location and Altitude (WGS-84)
-
a. The Rx Location and Altitude is the of the component in WGS-84 coordinates. The vertical distance between the component and the projection of its position on the earth’s ellipsoid, as defined by WGS-84, in two’s complement form.
I016/SP - Special Purpose Field
Definition: Special Purpose Field
Structure:
Explicit item (SP)
User Application Profile for Category 016
I016/010
- Data Source Identifier
I016/015
- Service Identification
I016/000
- Message Type
I016/140
- Time of Day
I016/200
- System Configuration Reporting Period
I016/300
- Pair Identification
I016/400
- Position of the System Reference Point
(FX)
- Field extension indicatorI016/405
- Height of System Reference Point
I016/410
- Transmitter Properties
I016/420
- Receiver Properties
I016/SP
- Special Purpose Field
(spare)
(spare)
(spare)
(FX)
- Field extension indicator