Asterix category 019 - Multilateration System Status Messages
category: 019
edition: 1.3
date: 2010-12-01
Preamble
Surveillance data exchange.
Description of standard data items
I019/000 - Message Type
Definition: This Data Item allows for a more convenient handling of the messages at the receiver side by further defining the type of information.
Structure:
8 bits [
........
]values:
1: Start of Update Cycle
2: Periodic Status Message
3: Event-triggered Status Message
- NOTES:
-
- In applications where data of various types is exchanged, the Message Type Data Item facilitates the proper message handling at the receiver side.
- All Message Type values are reserved for common standard use.
I019/010 - Data Source Identifier
Definition: Identification of the system from which the data is received.
Structure:
I019/010/SAC - System Area Code
- 8 bits [
........
]- raw value
I019/010/SIC - System Identification Code
- 8 bits [
........
]- raw value
- Note:
-
- The up-to-date list of SACs is published on the EUROCONTROL Web Site (http://www.eurocontrol.int/asterix).
I019/140 - Time of Day
Definition: Absolute time stamping expressed as UTC.
Structure:
- 24 bits [
........................
] - unsigned quantity
- unit: “s”
- LSB = 1/27 s ≈ 7.81e − 3 s
Note:
The time of day value is reset to zero each day at midnight.
I019/550 - System Status
Definition: Information concerning the configuration and status of a System.
Structure:
I019/550/NOGO - Operational Release Status of the System
2 bits [
..
]values:
0: Operational
1: Degraded
2: NOGO
3: UndefinedI019/550/OVL - Overload Indicator
1 bit [
.
]values:
0: No overload
1: OverloadI019/550/TSV - Time Source Validity
1 bit [
.
]values:
0: Valid
1: InvalidI019/550/TTF - Test Target
1 bit [
.
]values:
0: Test Target Operative
1: Test Target FailureI019/550/(spare)
- 3 bits [
...
]
Note:
A time source is considered as valid when either externally synchronised or running on a local oscillator within the required accuracy of UTC.
I019/551 - Tracking Processor Detailed Status
Definition: Information concerning the configuration and status of the Tracking processors.
Structure:
I019/551/TP1A
1 bit [
.
]values:
0: Standby
1: ExecI019/551/TP1B
1 bit [
.
]values:
0: Faulted
1: GoodI019/551/TP2A
1 bit [
.
]values:
0: Standby
1: ExecI019/551/TP2B
1 bit [
.
]values:
0: Faulted
1: GoodI019/551/TP3A
1 bit [
.
]values:
0: Standby
1: ExecI019/551/TP3B
1 bit [
.
]values:
0: Faulted
1: GoodI019/551/TP4A
1 bit [
.
]values:
0: Standby
1: ExecI019/551/TP4B
1 bit [
.
]values:
0: Faulted
1: Good
Note:
Both Bits of one TP set to zero means, that this TP is not used in the system.
I019/552 - Remote Sensor Detailed Status
Definition: Information concerning the configuration and status of the Remote Sensors (RS)
Structure:
Repetitive item, repetition factor 8 bits.
I019/552/RSI - 8-bit Identification Number of RS
- 8 bits [
........
]- raw value
I019/552/(spare)
- 1 bit [
.
]I019/552/RS1090 - Receiver 1090 MHz
1 bit [
.
]values:
0: Not present
1: PresentI019/552/TX1030 - Transmitter 1030 MHz
1 bit [
.
]values:
0: Not present
1: PresentI019/552/TX1090 - Transmitter 1090 MHz
1 bit [
.
]values:
0: Not present
1: PresentI019/552/RSS - RS Status
1 bit [
.
]values:
0: Faulted
1: GoodI019/552/RSO - RS Operational
1 bit [
.
]values:
0: Offline
1: OnlineI019/552/(spare)
- 2 bits [
..
]
I019/553 - Reference Transponder Detailed Status
Definition: Information concerning the configuration and status of the Reference Transponder.
Structure:
Extended item.
I019/553/REFTR1 - Ref Trans 1 Status
2 bits [
..
]values:
1: Warning
2: Faulted
3: GoodI019/553/(spare)
- 2 bits [
..
]I019/553/REFTR2 - Ref Trans 2 Status
2 bits [
..
]values:
1: Warning
2: Faulted
3: GoodI019/553/(spare)
- 1 bit [
.
]
(FX)
extension bit
0: End of data item
1: Extension into next extentI019/553/REFTR3 - Ref Trans 3 Status
2 bits [
..
]values:
1: Warning
2: Faulted
3: GoodI019/553/(spare)
- 2 bits [
..
]I019/553/REFTR4 - Ref Trans 4 Status
2 bits [
..
]values:
1: Warning
2: Faulted
3: GoodI019/553/(spare)
- 1 bit [
.
]
(FX)
extension bit
0: End of data item
1: Extension into next extent
I019/600 - Position of the MLT System Reference Point
Definition: Position of the MLT reference point in WGS-84 Coordinates.
Structure:
I019/600/LAT - Latitude
- 32 bits [
................................
]- signed quantity
- unit: “°”
- LSB = 180/230 ° ≈ 1.68e − 7 °
- value > = − 90 °
- value < = 90 °
I019/600/LON - Longitude
- 32 bits [
................................
]- signed quantity
- unit: “°”
- LSB = 180/230 ° ≈ 1.68e − 7 °
- value > = − 180 °
- value < 180 °
I019/610 - Height of the MLT System Reference Point
Definition: Height of the MLT system reference point in two’s complement form. The height shall use mean sea level as the zero reference level.
Structure:
- 16 bits [
................
] - signed quantity
- unit: “m”
- LSB = 1/22 m ≈ 0.25 m
- value > = − 8192 m
- value < = 8192 m
I019/620 - WGS-84 Undulation
Definition: WGS-84 undulation value of the MLT system reference point, in meters. Geoid undulation value is the difference between the ellipsoidal height and the height above mean sea level
Structure:
- 8 bits [
........
] - signed quantity
- unit: “m”
- LSB = 1 m
I019/RE - Reserved Expansion Field
Definition: Expansion
Structure:
Explicit item (RE)
I019/SP - Special Purpose Field
Definition: Special Purpose Field
Structure:
Explicit item (SP)
User Application Profile for Category 019
I019/010
- Data Source Identifier
I019/000
- Message Type
I019/140
- Time of Day
I019/550
- System Status
I019/551
- Tracking Processor Detailed Status
I019/552
- Remote Sensor Detailed Status
I019/553
- Reference Transponder Detailed Status
(FX)
- Field extension indicatorI019/600
- Position of the MLT System Reference Point
I019/610
- Height of the MLT System Reference Point
I019/620
- WGS-84 Undulation
(spare)
(spare)
I019/RE
- Reserved Expansion Field
I019/SP
- Special Purpose Field
(FX)
- Field extension indicator